Click to see the performanceTitan III Composite Deck Screws

Now you can drive screws into nearly every type of composite decking, regardless of density, without need of a pre-drilling or dimpling function, while eliminating the unsightly mushrooming effect common to many other screws. With the Titan III, you will get excellent head-setting results, with a smaller, less obtrusive head.

Experience the best performing composite screw available today. Our new Titan III Star Drive Composite Screw design employs a unique tri-faceted thread/shaft design, barb-type rings under the head of the screw, our recognizable knurled shaft, and a specially designed thread angle - all created to reduce drive torque and pressure within the composite board normally generated by compression.

Compression problems plague most of our dual-thread-type competitors' screws. It results in board-end splitting, secondary mushrooming, blow-out, recess drive skipping and spin-out.

Complete your projects using any type of wood substrate joist materials. Get closer to the end of a board - without splitting - than ever before.

CedarStar Drive Titan III Composite Screws with Cedar Finish RedwoodStar Drive Titan III Composite Screws with Redwood Finish  

 

 

Titan III Composite Deck Screws

Available in 2", 2 1/2" and 3" Sizes

(Stainless Steel available in 2 1/2" Builder and Industrial Packs only

 

(Click Here for Drive Bits)

Grey  Star Drive Titan III Composite Screws with Grey Finish Dark Brown Star Drive Titan III Composite Screws with Redwood Finish
  Stainless Steel
Star Drive Titan III Composite Screws with Grey Finish
If your composite decking project is being used commercially or on-the-water, choose stainless steel for your project and maintain the Titan, Limited Lifetime Warranty against Corrosion. This heavy-duty, 300 series, stainless steel version of our standard TIII composite screw will provide the ultimate in rust resistance while delivering the same unsurpassed drive experience associated with our TIII ACQ Rated Composite Screws.
 

 2" Titan III Composite Deck Screws
Builder Pack of 400
$28.97
Includes T15 Star Drive Bit
Cedar, Dark Brown, Gray & Dark Redwood

2" Titan III Composite Deck Screws
Industrial pack of 1200
$118.83
Includes T15 Star Drive Bit
Cedar, Dark Brown, Gray & Dark Redwood

 2 1/2" Titan III Composite Deck Screws
Builder Pack of 275
$25.68
Includes T20 Star Drive Bit
Cedar, Dark Brown, Gray & Dark Redwood
Stainless Steel - $65.51

 

2 1/2" Titan III Composite Deck Screws
Industrial pack of 1200
$101.51
Includes T20 Star Drive Bit
Cedar, Dark Brown, Gray & Dark Redwood
Stainless Steel - $269.75
 
2 1/2" Titan III Composite Deck Screws
Pail Pack of 2,100
$172.05
Includes T20 Star Drive Bit
Cedar, Dark Brown, Gray & Dark Redwood

3" Titan III Composite Deck Screws
Builder Pack of 235
$25.68
Includes T20 Star Drive Bit
Cedar, Dark Brown, Gray & Dark Redwood
 
3" Titan III Composite Deck Screws
Industrial Pack 1,025
$101.51
Includes T20 Star Drive Bit
Cedar, Dark Brown, Gray & Dark Redwood
 
3" Titan III Composite Deck Screws
Pail Pack. 1,750
$172.05
Includes T20 Star Drive Bit
Cedar, Dark Brown, Gray & Dark Redwood

1/4" x 1" Star Drive Bits - 150 count
Our High Performance SplitStop Accessory insert drive bits are made from steel hardened to the upper-end of the industries hardness scale, are very well defined and deliver long-lasting, quality, hassle-free results, at a very affordable price. Insert drive bits are constructed from hex-shaped steel and are available in sizes to compliment our screw product line. They are offered in two lengths; 1 (25mm) and, for longer reach or use in an impact driver, 2.
 
$98.05
Available in T15, T20 and T25